THE PAINT POT
Fire Resistant AquaSteel WB+
Fire resistant AquaSteel WB+ intumescent coating provides an easier and more efficient alternative to cladding steel members in plasterboard!
Zeroflame continue to make things simpler.
Normally calculating the required material to achieve fire protection for structural steel involves the complicated and time consuming process of getting details of all the steel members involved in the project and calculating the exact amount of material required for each one.
Now things have been made even easier:
AquaSteel WB+ intumescent coating combines the ability to protect all standard steel sizes and profiles for both 1/2 hour and 1 hour fire resistance in a single product.
- Achieves both 1/2 hour and 1 hour fire resistance on structural steel
- Suitable for use on all standard steel sizes and profiles
- Tested to internationally accepted standards - BS476 Parts 20 & 21
- Waterborne
- Can be applied by brush, roller or air-less spray
- Simple specification
- Full specification and application details included on container label
- Certificate application included with each container
- Available in 2.5L, 5L and 10L sizes
Never before has there been such a simple product to use for the protection of timber against fire!
To say that Zeroflame Fire Retardant Treatment is revolutionary is an understatement.
This product:
- Will protect timber substrates to Euro-class B certification standard
- Can be used internally and externally
- Is not affected by moisture when dry
- Is non-toxic and non-allergic
- Tested to European Standard BS EN 13823 and BS EN 11925-2
- Achieves Class 0 on solid timber
- Suitable for timber in both internal and external environments
- Moisture resistant
- Unaffected by wear
- Simple specification
- Clear finish leaves timber looking natural
- Non-specialist application
- Waterborne
- Suitable for off-site application
- Application by brush, roller or spray
- Biologically and ecologically safe
- Colourless and odourless
- Non-leaching
- Unaffected by humidity
- Certificate application included with each container
- Coverage rate – 3.7m2/litre
- Available in 5L size
Fire Resistant AquaSteel WB+
Gloss or Eggshell Finish
- Protective finish for AquaSteel WB+
- Able to order in any RAL or BS colour
- Available in 2.5L size
- Theoretical coverage 12m²/litre
Available in Gloss or Eggshell finish.
Zeroflame Fire Retardant Paint is one of the most versatile fire protection coatings available on the market.
It will achieve Class 1 and Class 0 on timber surfaces, it will maintain Class 1 and Class 0 on non-combustible surfaces such as plaster walls, it can be applied over sound existing coatings and can be over-coated with standard latex paints where a decorative finish is required. Added to all this it is a single-pack, waterborne product which is extremely simple to use.
- Class 1 and Class 0 protection achieved
- Waterborne
- Single pack system
- Application by brush, roller or spray
- Can be applied over sound existing coatings
- Matt white finish
- Can be over-coated with a latex paint where a decorative finish is required
- Coverage rate 3.7m2/litre
- Tested to BS476 Parts 6 &7
- Certificate application included with each container
- Available in 5L size
